jGpGGG
zGvG
uGGG
{GGGG
jGvG
vGGGG¡G
<Picture/DNR>
1) Sharpness :
Adjust sharpness of outlines (0~15)
2) Resolution :
Select high resolution mode (Low/Mid/High)
3) 2D-NR :
Select 2D noise reduction level (0~6)
¾
2D-NR : Noise reduction on a frame
4) 3D-NR :
Select 3D noise reduction level (0~31)
¾
3D-NR : Noise reduction through several frames
5) DNR Demo :
Select DNR Demo Display On/Off using the Left and Right Buttons
None DNR Effect
Display
DNR Applied
Display
<Effect/Special>
1) d-Effect(Digital Effect) :
Select digital Flip/Rotate state (Off/Rotation/Mirror/V Flip )
2) Nega :
Select negative color state(on/off)
3) d-PTZ
(Digital Pan, Tilt, Zoom)
: Adjust d-PTZ.
¾
Func : Press the Enter button to turn digital zoom on/off.
¾
Zoom : Use the Left and Right buttons adjust to digital zoom(0-255).
¾
Pan&Tilt : Press the Enter button to access the Pan&Tilt.
Use the Left and Right buttons adjust to digital pan
Use the Up and Down buttons adjust to digital tilt
Press the Enter button to exit.
¾
PT Reset(Pan & Tilt Reset) : Press the Enter button to reset digital pan and tilt.
4) Freeze :
Select the still mode on/off
5) Frame Control:
Select term of refresh rate for output video. This function is useful to
reduce the recording data storage.
¾
Func : Select frame control mode to ON/OFF, and Auto.
Auto mode : When motion is not detected, output video is being
refreshed at a configured interval. When motion is detected, output video
is switched to real-time video.
ON : Always refresh in configured interval.
OFF : Always real time video.
¾
Renewal(sec) : Select an interval between two frames.
6) ScnChg/Unfoc :
Select scene change/unfocus detection On/Off .
¾
Detects whether scene has been changed or not. Detects breaking or changing
of the scene (Spray, Screen Camera, Changing Scene…)
¾
This function is linked to alarm out
14
