4. Installation
4.1 Connections
Alarm Out
Monitor Output
Looping (Automatic Termination)
camera 1
camera 2
camera 9
Spot Monitor Output
Alarm In
RS232 Connector
In
Out
Looping (Automatic
Termination)
Trig In/Out
RS485 Connector
DC 5V
AC-IN
Power
Adapter
Time Lapse VCR
Monitor 1
Monitor 2
5. Programming
Table 1 Key Functions
Programming Functions
Key label
Operating Function
Programming Function
TITLE
Selects to display or delete Title on monitor
(latching).
NONE
VCR
Selects VCR input to display on monitor.
Selects Title and VCR to display the recording status
on monitor.
NONE
ALARM
Selects the alarming mode and alarm reset
function.
NONE
MENU
Selects the programming mode.
Selects entries.
FREEZE/
+
Selects the freeze mode display on monitor.
Increases the programmed value on menu
Screen.
ZOOM/-
Selects the zoom mode display on monitor.
Decreases the programmed value on menu
screen.
△
NONE
Scrolls upwards through program selections;
selects entries.
SPOT/
▽
Sets the Spot monitor (analog screen).
Scrolls downwards through program selections;
selects entries.
SEQ/
◁
Selects the sequential switching function.
Shifts cursor to the left in menu; selects entries.
CHANGE/
▷
In multi-picture mode, allows the reassignment of
another camera to the selected window.
Shifts cursor to the right in menu; selects entries.
SHIFT/ENTER
See Shift + Key below.
Moves to the sub-menu.
Numeric (1-9)
Selects the designated camera; displays the full
screen in normal mode or VCR mode.
NONE
SHIFT+KEY
1,2,3,4,5 & 6
Changes the split screen:
Pressing the Shift Key with 1,2,3,4 or 6 key on the full
screen or split screen changes the screen split as
follows: 2x2(quad screen), 5+1(6-screen), 6+1(7-
screen), 7+1(8-screen), 3x3(9-screen) on monitor.
NONE
3
