Vicon SurveyorVFT SVFT-C266A, Руководство по установке и эксплуатации

Страница: 27 / 36

Disassembly
The SurveyorVFT Fixed Camera Dome can be easily disassembled by removing the camera mechanism
from the housing or enclosure. A safety cord is always available to safely hang the camera mechanism while
assembling or disassembling.
In-Ceiling Installation
1. Gently pull down on the lower dome’s outside edge, with two hands, until all molded tabs snap out of
Pendant Installation
. Push in the tabs on the housing until the camera mechanism is released.
place.
2. Push in the tabs to release the camera mechanism from the enclosure. It will hang from the safety cord.
3. If it is necessary to completely remove the camera mechanism, disconnect the safety cord clip and all
cables.
1. On outdoor version only, loosen the four (4) trim ring screws from the outdoor lower dome.
2. Gently pull down on the lower dome’s outside edge, with two hands, until all molded tabs snap out of
place.
3
4. Allow the SurveyorVFT to gently drop down until it is supported by the safety cord.
5. If it is necessary to completely remove the SurveyorVFT, remove all cable connections and disconnect
the clip on the end of the safety cord from the tab on the enclosure.
XX152-01-00 Rev 404 SurveyorVFT Fixed Camera Dome Installation
•
17