Wiring
|
3-15
Surveyor MKII HD Network Dome
Wiring the Surveyor MKII Network Dome
Wiring is done with runs of cable for power, network and control. Optional
wiring can be installed for the alarm input. Refer to the Technical Information
section for all electrical requirements.
Power
Power cables carry AC power and are usually a two-conductor type ranging
in size from 20 to 16 AWG. The power source used should be a UL listed
Class 2 indoor/dry or Class 3 outdoor/wet rated type power supply. The leads
should be connected to Terminal Block 2 (J2). The size of the two-conductor
cable depends on indoor/outdoor application and cable distance as shown in
the Table in the Technical Information section. PoE+ (Power over Ethernet) is
provided through the RJ-45 connector (J4)
Video
Video is digitized and made available through the RJ-45 LAN connection
(J4). Refer to the Reference section of this manual for information on
recommended cable types and maximum distances; communication signals
are digitized and are made available through the RJ-45 LAN connection.
Refer to figure below.
Control
Communication signals are digitized and are made available through the
RJ-45 LAN connection.
