Vicon Series 247-00-03, Руководство пользователя

Страница: 23 / 77

23
3.2. Access from the internet
Once connected, the V-CELL-IP Camera is accessible on your local network (LAN). To access the
camera from the Internet you must configure your broadband router to allow incoming data traffic to
the camera. To do this, enable the NAT-traversal feature, which will attempt to automatically
configure the router to allow access to the camera. This is enabled from Setup > System > Network >
NAT.
For more information, see NAT traversal (port mapping) for IPv4, on page 60.
3.3 Setting the admin password over a secure connection
To gain access to the product, the password for the default administrator user must be set. This is
done in the “Admin Password” dialog, which is displayed when the network camera is accessed for the
setup at the first time. Enter your admin name and password, set by the administrator.