Vicon Series 247-00-03 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 77

background image

15

7. When the camera mounting frame assembly is secured to the surface, apply an epoxy security
sealant around the perimeter of the base plate assembly where it meets the ceiling/wall. [Vicon
recommends DynaPoxy™ EP1200 (US) or Arbokol 1025 (UK) or equivalent for this purpose.]

Cable Connections

All cabling is done to the boards located on the back of the front plate.

Note: Vicon systems and components, like most electronic equipment, require a clean, stable power
source. Voltage irregularities such as surges, drops, and interruptions can affect the operation of your
equipment and, in severe cases, damage certain components.

Analog Cable Connections
1. Connect the power cable to the 2-postion terminal block. The camera accepts 24 VAC (or 12 VDC)

and polarity is not relevant.

2. Connect the coaxial cable for video output to the BNC connector.
3. To adjust the intensity of the LED illuminators, use switch slides. The factory setting is for

maximum intensity.

4. Connect the device to the AO (Alarm Out) and G (Ground) terminal block connectors. Alarm Out:
  can activate external devices such as buzzers or lights.

IP Cable Connections
1. Use the RJ-45 connector if powering the camera using PoE. If using 24 VAC (or 12 VDC), connect
  the power cable to the 2-postion terminal block. Connect the positive (+) pole to the ‘+’ position
  and the negative (-) pole to the ‘-’ position. Use certified/Listed Class 2 power source only.
2. Video and data are transmitted via the RJ-45 connector. Generally a cross-over cable is used for
  direct connection to PC, while a direct cable is used for connection to a hub

.

3. To adjust the intensity of the LED illuminators, use web control. The factory setting is for maximum

intensity.

4. Alarm connections: AI (Alarm In): External devices can signal the network camera to react on
  events. Mechanical or electrical switches can be wired to the AI (Alarm In) and G (Ground) terminal
  block connectors. G (Ground): Connect the ground side of the alarm input and/or alarm output to
  the G (Ground) connector. Alarm Out: The network camera can activate external devices such as
  buzzers or lights. Connect the device to the AO (Alarm Out) and G (Ground) terminal block
  connectors.
5. Connecting Video Output: Video Output is provided for an easy zoom and focus control when
  adjusting lens. Connect your Video cable unit to J5 on the board.

Final Installation

When all connections are made, secure the front plate to the base plate using the security screws
previously removed using no. 20 Torx bit.

«
...
13
14
15
16
17
...
»

Содержание Series 247-00-03














































































Отзывы:

Нет отзывов

Похожие инструкции для Series 247-00-03

Бренд: ABB Страницы: 20

Wisenet SNK-B73040BW

Бренд: Samsung Страницы: 16

Бренд: Eaton Страницы: 12

Бренд: Black Widow Security Страницы: 6

DH-EPC PTZ Series

Бренд: Dahua Страницы: 28

Бренд: Alecto Страницы: 12

Бренд: Servodan Страницы: 6

Бренд: Tamron Страницы: 3

Бренд: Maxocam Страницы: 7

Бренд: Zennio Страницы: 13

Бренд: ZOpid Страницы: 5

Бренд: Halo Smart Labs Страницы: 34

Бренд: Konig Security Страницы: 56

Бренд: Vitek Страницы: 2

Бренд: WATERGUARD Страницы: 2

Бренд: Basler Страницы: 55

Бренд: ESP Страницы: 4

DVR-9404~9408~9416

Бренд: Mace Страницы: 142

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды