Vicon S2000-UPM, Инструкция по установке и эксплуатации

Страница: 5 / 11

XX038 Rev 300 S2000-UPM Parapet Mount Introduction
••••
1
Introduction
The information in this manual covers the installation, operation, and maintenance of the S2000-UPM Parapet
Mount. This unit should only be installed by a qualified technician using approved materials in accordance with
national, state, and local codes. Read these instructions through completely before attempting installation.
The S2000-UPM is designed to allow the Surveyor2000 Camera Dome System to be mounted over a roof
parapet or similar structure. The parapet mount provides a sturdy installation capable of withstanding extreme
weather conditions. It allows the mounted equipment to be swiveled onto the roof for easy serviceability and
adjustment.
Installation
Installing the Mounts
The S2000-UPM Parapet Mount consists of the parapet mount neck, two wall bracket assemblies, a support
bracket, a cap, reducer coupling/nipple assembly, a coupling (optional), Teflon tape, and appropriate
hardware. See Table 1. The hardware used to secure the brackets to the mounting surface must be supplied
by the customer and appropriate for the type of mounting surface.