5. Cleaning -
Step
a
applies to equipment that can be
disconnected from the CCTV system without seriously
jeopardizing security. Step
b
applies to equipment that
must operate continuously such as video switching
equipment at military installations.
Important
Safeguards
a. Disconnect this video product from its power source
before cleaning. Do not use caustic, abrasive, or
aerosol cleaners. Use a damp cloth for cleaning.
b. Use a damp cloth to clean the equipment. Do not
allow moisture or liquids to enter any vents. Do not
use caustic, abrasive, or aerosol cleaners.
6. Attachments -
Do not use attachments not
recommended by Vicon as they may cause hazards.
GRAPHIC SYMBOL EXPLANATION
7. Water and Moisture -
Do not use this video product
in any location where it may be exposed to water or
moisture. This does not apply to outdoor camera
housings, outdoor pan-and-tilt drives, and other
equipment designed for direct exposure to outdoor
environments.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
8. Accessories -
Do not place this video product on any
unstable surface or table. The video product may fall,
causing serious injury to a person and serious damage
to the video product. Use only with a mounting accessory
recommended by Vicon, or sold with the video product.
Any mounting of the video product should follow Vicon’s
instructions, and a mounting accessory recommended
by Vicon should be used.
9. Ventilation -
Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the video product and to protect it from overheating,
and these openings must not be blocked or covered.
The openings should never be blocked by placing the
video product on a rug or other similar surface. This
video product should never be placed near or over a
radiator or heat register. This video product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or Vicon’s
instructions have been adhered to.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the unit.
1. Read Instructions -
All the safety and operating
instructions should be read before the video product is
operated.
2. Retain Instructions -
All the safety and operating
instructions should be retained for future reference.
10. Power Sources -
This video product should be
operated only from the type of power source indicated
on the marking label. If you are not sure of the type of
power supplied to your installation site, consult your
Vicon dealer or local power company. For video
products intended to operate from battery power, or
other sources, refer to the operating instructions.
3. Heed Warnings -
All warnings on the video product
and in the operating instructions should be adhered to.
4. Follow Instructions -
All operating and use
instructions should be followed.
X935-20-00 Rev 1204 V894CSHR-VF/V894WSHR-VF High-Security Cameras
•
iii
