Final Installation Steps
The last installation steps include repositioning the camera and fastening the outer cover in place.
1. If the camera was removed, rotated or tilted during the cable connection, reinstall the camera and adjust
until it is directed at about the center of the black mask on the inside of the housing window. Be certain
the lens doesn’t touch the winsow when reinstalling the cover. It is best if the picture from the camera can
be viewed on a monitor for this procedure in order to achieve the best positioning of the camera. Make
sure camera is oriented correctly; top of camera is labeled.
2. Secure the outer cover with the three (3) (V894CSHR-VF-C) or four (4) (V894WSHR-VF-C) tamperproof
screws provided. A screw locking compound such as Loctite™ is recommended. Save the special tool
and the two spare tamperproof screws.
Maintenance
The V894CSHR-VF-C and V894WSHR-VF-C require no maintenance except the occasional cleaning of the
housing and window. Use a soft cloth and plain soap and water. Do not use abrasive cleansers that can
scratch the window surface or the finish on the housing.
Fuse Replacement
There is a resettable fuse located on the back of the PCB.
8
•
Maintenance
X935-20-00 Rev 1204 V894CSHR-VF/V894WSHR-VF High-Security Cameras
