Vicon Roughneck Pro V2360W-12, Быстрое руководство

Страница: 10 / 21

V2360W Panoramic Fisheye | Quick Guide
9 -
2.2.2 Mounting Camera
1. Attach the Guide Pattern to the mounting surface.
2. Drill 4 relative holes on a clean flat surface (ceiling or wall). Insert 4 plastic anchors into the drilled holes.
3. Attach the flat bracket onto the surface by fixing it tightly with the 4 screws (TP4).
Be sure to plug the drilled holes with the 4 plastic anchors prior to securing the bracket with the screws.
4. Open the rear cap by loosening the 3 screws. Connect the required cable threads as needed: 24 VAC/
12 VDC power cord to the 2-pin power terminal, Ethernet cable to the PoE port, and the additional audio
and alarm input/output cables to the 8-pin terminal block. Remove the rubber plug and insert the required
jacketed cables through the waterproof grommet to ensure proper IP66 water ingress protection; terminate
the cables. Note: do not slit or alter the grommet. If required, open the side cap by loosening the 2 screws
and insert a customer-supplied Micro SDHC/SDXC card into the embedded slot. Restore each of the caps
back to their positions and fasten the screws securely.
Caution
: Fully tighten screws after installing cable and uSD card to ensure IP66 sealing of camera.