Vicon Roughneck Pro V2002D-PTZ, Руководство пользователя

Страница: 87 / 98

83
V2002D-PTZ User’s Manual
10. PTZ Settings
In this chapter, user will be guided through setup steps for various types of PTZ operations, including
PTZ movements (pan, tilt, zoom and focus); and actions (Scan, Preset, Tour and Pattern). In addition,
Basic PTZ settings and PTZ Control Panel settings are also explained.
Note

Click “Save” button at the end of sections in “PTZ settings” chapter after changing
configurations for the settings take effect.

A f ew of the configurations will not require clicking “Save” for setting s to take effect
(e.g., Start/Stop).
10.1 Basic
Basic Setting
Figure: Basic Setting
Power on Action: NONE/Home/Auto Scan/Frame Scan/Auto Tour 1~4/ Pattern 1~4
The camera can execute a PTZ action when the system is powered on or rebooted. These actions are
listed below:

NONE: Camera will have no action when powered on.

Home: Camera will automatically move to its home position.

Auto Scan: Camera will perform scanning automatically.

Frame Scan: Camera will perform frame scanning automatically.

Auto Tour 1 ~ 4: Camera will perform tour action based on selected tour.

Pattern 1 ~ 4: Camera will perform pattern action based on selected pattern.
Auto Return: NONE/Home/Auto Scan/Frame Scan/Auto Tour 1~4/ Pattern 1~4
The camera can execute certain PTZ actions when no PTZ action or PTZ movement occurs in the
user defined timeout period. The actions are the same as the options for “Power on action . ”
Auto Return Timeout (min): 1/2/3/5/10/20/30/60
Set a timeout in minutes to activate Auto Return.
Lens Stabilization: On/Off
Lens-based stabilization that counteracts horizontal and vertical vibrations. Set this function “O n ” to
minimize image blur and jitter resulting from camera shaking.