Vicon Roughneck Pro V2002D-PTZ, Руководство пользователя

Страница: 49 / 98

45
V2002D-PTZ User’s Manual
SSH/FTP/SFTP/Port Scan/File Manipulation
Enable: On/Off
Set "On" to activate Passive Protection mode for a specific protocol or service.
Email: On/Off
Set “On” to enable an email to be sent to a predefined user when an IP address has been banned.
Period: 1 ~ 10
Set an amount of time, in minutes, in which an IP address is allowed to try and fail to access or
connect to camera.
Frequency: 1 ~ 10
Set a frequency within a period in which an IP address is allowed to try and fail to access or connect
to camera.
Ban: Infinite/1/3/5/10/30/60
Set a time, in minutes, in which an IP address will be banned for trying and failing to access the
camera with a certain frequency within a period. Or set period to infinite to never allow IP address to
access or connect to IP camera.
Note

Only “Enable” and “Email” are available in File Manipulation.
Email
Figure: Email
In this section user can configure settings for both email sender and receivers. The Email
configuration is jointly used by all protocols and services under Passive Protection.
R efer to “
9.3 Email
” section for details about Authentication, Server Address, User Name, Sender Email
Address, Port and Password functions.
Email Address: 1 ~10/On/Off
Email can be sent to up to 10 users with privilege to access server. Choose a specific user number,
and then set to
“On“ to allow email to be sent to the user. Next, separately, enter t he user email
address for each user.
Banned IP List
Figure: Banned IP List
Whenever an IP address is banned, it will be shown on the Banned IP List, including the time it was
banned
.
Select an IP address or select all IP addresses; then click reset to remove it or them from the banned
list at your convenience.