Vicon Roughneck Pro V2002D-PTZ, Руководство пользователя

Страница: 26 / 98

22
V2002D-PTZ User’s Manual
3. Video
3.1 Privacy Zone
Basic Setting
Privacy Zone enables user to block out a specific portion of the view with a solid color mask for
privacy concerns. It must apply on all streams, TV output, and Live View; and it should not affect the
motion detection behavior. There are up to 8 privacy zones for users to define on the view.
Figure: Privacy Zone Setting

Privacy Color Setting
Click the dropdown menu to select color (Black, Gray or White) for
privacy zone. Selected color will be applied to all the privacy zones
collectively. Click
“S ave ” for the action to take effect.

Enable
Select “ On ” or “ Off ” to enable or disable P rivacy Zone, respectively.
Click “Save” for the action to take effect. After savi ng the changes, when Enable is “ On, ” if any privacy
zone was previously setup in the current view it will show on the view. Enabling or disabling privacy
zone will be applied to privacy collectively.

Zone Setting
To set up privacy zone, user first needs to define a view using PTZ control panel; then select a zone
from Basic Setting list.
Click
“S etup ” and a transparent blue block will appear in the middle of the view.
Define the size and shape of the transparent blue block by either left clicking on any point of the view
or left clicking on any point of the view and dragging to outline a desired transparent blue block.
Finally, c
lick “Save” for the action to take effect ; the transparent blue block will turn into solid color
block, which represents the privacy zone.
Privacy zone is setup; now
“View” and “C lean ” options will become available.
For zones already setup, click “V iew ” to go to the scene where privacy zone was defined. If privacy
zone is enabled, solid color block will be seen on the view; however, if privacy zone is disabled, no
solid color block will be seen on the view.
For zones already setup, click “C lean ” to delete the solid color block. This action will cancel privacy
zone setup and make “V iew ” unavailable for specific zone.
Note

Set the privacy zone slightly larger than the actual area to ensure privacy
concern.

The maximum size of the privacy zone can reach full resolution.

Privacy zone must be kept after changing resolution and codec format.