Vicon RF121 R, Руководство по эксплуатации

Страница: 43 / 61

41
EN
16657715_en 05/2006
5.4.2 Changing the blades
Danger!
During all work on the cutting system,
switch off the engine and wait for the
machine to come to a complete standstill.
Close the cutting system hydraulics with
the shut-off tap. Always wear protective
gloves when working with the blades and
never touch the blades on the cutting
edge.
Swivel out the cutting assembly hydraulically.
Change the 3-way ball valve to the cutting assembly
position.
Open the tailgate hydraulically,
Secure the tailgate - close the hydraulic tap
(see Section 1.6, Point 10),
Close the hydraulic tap (b) for the cutting system
located on the right-hand side of the machine,
Switch off the tractor engine,
Turn the blade shaft, lower the lever (a),
Grip the blade at the end and pull out upwards,
alter the position of the conveying tines by turning
the conveying drum, if necessary,
Sharpen the blades (only when disassembled),
Mount the blades in the reverse order.
Note:
Always keep the blades sharp. The power
consumption can be reduced considerably
by doing this.
a
b