Vicon RF121 R, Руководство по эксплуатации

Страница: 10 / 61

8
EN
16657715_en 05/2006
1.3 Type plate
The type plate specifying the machine type and number is located on the left-hand side of the machine,
underneath the front hood on the vehicle frame.
Note:
Enter the data on the type plate into the box provided for this purpose on the second page.
1.4 Intended use
The round baler is exclusively constructed for ordinary use in agricultural work and intended for and
suited to gathering mown crops lying in swaths on the ground, compressing this into round bales and
binding it with plastic twine or wrapping it with netting.
It is not intended for any other use. The manufacturer shall not be liable for damage resulting therefrom.
The user shall bear all responsibility.
Intended use also comprises adhering to the operating, maintenance and servicing directions prescribed
by the manufacturer. The machine may only be used, maintained and repaired by persons who are
familiar with the work and who have been informed of the dangers.
The relevant accident prevention regulations and other generally recognised regulations concerning
safety, industrial medicine and road traffic are to be observed.
Attention!
Unauthorised changes to the machine remove all liability on the manufacturer´s part for
damage arising therefrom.
1.5 Liability
All persons who work on and with this machine must read and note these operating instructions.
Furthermore, this machine may only be deployed for its intended use (see Section 1.4).
1. Work on this machine must be carried out in accordance with the instructions contained in the
current documentation.
This documentation can be made up of the following:
mounting instructions
operating instructions
supplementary sheets