Vicon KOLLECTOR PRO XG **128-33-00 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 263

Vicon KOLLECTOR PRO XG **128-33-00 Скачать руководство пользователя страница 73

XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder

Configuring the ViconNet System

•

65

Configuring/Modifying Cameras, Sensors and Relays

NOTE:

The Kollector Pro does not currently support audio input.

The ViconNet system enables you to configure or modify the various devices that you want to be
operational in the system, depending on your requirements, including:

•

Configuring/Modifying Local cameras

, below

•

Configuring/Modifying Switchers and Multiplexers

, page 70

NOTE:

This feature will be functional in future versions.

•

Configuring/Modifying Sensors (Detectors)

•

Configuring/Modifying Relays

, page 72

Each device that you connect to a specific input in the system must be configured separately, using the
ViconNet application, so that the system can recognize and operate the device. This consists of configuring
information that enables the system to identify the device such as the device type, name, input number, and
so on.

During device configuration, a table of buttons for all devices is displayed. When you select a device from
this table, the configurable information, specific to the selected device and input, is displayed in the bottom
portion of the window.

NOTE:

The device appears in the Site List automatically and can be used immediately for all available

system functions. No configuration is required for this purpose.

Configuring/Modifying Local cameras

The ViconNet system enables you to configure or modify up to 16 local cameras in the system.

If you want to configure switchers or multiplexers in addition to local cameras, then you can configure up to
a combined total of 16 devices. Refer to

Configuring/Modifying Switchers and Multiplexers

, page 70, for

additional details.

The settings described in this section, which are accessed via the

button, apply when

connecting to any remote transmitter.

TIP:

The local camera definition procedure, described below, includes a region of interest (ROI) area
definition aspect, by which recording and display update is triggered only when the changes to the
camera view affect defined ROI areas, at specified sensitivities. This usefully conserves storage
capacity by limiting the number of frames recorded to those required for business purposes.

«
...
71
72
73
74
75
...
»

Содержание KOLLECTOR PRO XG **128-33-00








































































































































































































































































Отзывы:

Нет отзывов