Vicon KOLLECTOR PRO XG **128-33-00, Руководство пользователя программного обеспечения, Страница: 161 / 263

XX128-33-00 Rev 806 Kollector Pro Network Digital Video Recorder Configuring the ViconNet System
•
153
4. To add a device (camera or sensor) to the displayed map, drag the device from the devices list in the
left-hand panel into its required location onto the displayed map. An icon and a label are displayed on
the map.
NOTE : After you drag the device onto the map, the device and its label become two separate objects. If
you move the device to another location on the map, the device icon and the label must be
dragged separately.
To activate a device, click the icon on the map. If the device is activated, the icon blinks.
To deactivate the device, click the icon again. If the device is deactivated, the icon remains steady (not
blinking).
Exiting the Maps Editor Window
There are two ways to exit the Maps Editor window:
•
To save your changes, click Save and Exit .
•
To close the window without saving your changes, click Close . In this case, a confirmation message
appears to verify that you do not want to save your changes.
In both cases, the Maps Editor window is closed.