Vicon 16CH, Руководство пользователя

Страница: 74 / 158

System Setting
74
| System Setting
\ \ System event
You can set event actions for disk, recording, network and system events. As same to setting event actions for normal events, you
can set to trigger alarm output, buzzer, display on-screen pop-up, or send event notification via email and FTP.
1.
From < SySteM SetUP > - < event >, select < SySteM event >.
2.
Use the [
▲▼◀▶
] buttons on the remote control or use the mouse to specify the reaction to each event.
3.
To apply the change, click < aPPly > in the bottom of the screen.
4.
When done, press the [ exit ] button on the remote control or click < cloSe > in the lower screen to return to the previous
menu.
disk
i
OVERWRITE START EVENT : if you set the disk write
mode to < oveRwRite >, this event occurs when the
disk is full and the overwriting begins accordingly.
i
DISK FULL EVENT : if you set the disk write mode
to < once >, this event occurs when the disk is full
(100%).
i
DISK SPACE EXHAUSTED EVENT : Event that is
triggered if the disk is almost full.
Click to specify the threshold percentage of usage to
trigger the event.
i
S.M.A.R.T EVENT : Occurs if the disk causes the
S.M.A.R.T error.
i
NO DISK EVENT : Occurs if no disk is recognized after the booting due to a disk failure or cable problem.
J
To detect the disk error, it is recommended not to change the settings of the S.M.A.R.T event, no disk event and buzzer output.
Record
i
PANIC RECORD START EVENT : Specify the action to
perform when the panic recording begins.