Vibratrim VT300 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 15

Vibratrim VT300 Скачать руководство пользователя страница 12

Creating a new you!

USING THE REMOTE CONTROL

Basic Operations (Program Mode)



Plug in the machine and flip the on button next to the power cord. The switch will light. Press the
Power button on either the control panel next to the vibrating plate or on the remote.



Use the Time



UP to increase the



DOWN to decrease the amount of time the unit will

operate before it shuts off. This will be displayed in the screen on the monitor. The maximum
time is 20 minutes. The default is 10 minutes.



Press the Mode to select the desired P1, P2 or P3 program.

P1:speed changes circularly as 2,4,6---34,36,34---6,4,2 with 5 second interval between each
speed.
P2:speed changes circularly as 4,8,12---32,36,32---12,8 with 5 second interval between each
speed.
P3:speed changes circularly between 2 and 36 with 5 second interval.



Press the On/Off button and the vibrating pad will automatically move to the correct speed for
the program selected. (The program P1, P2,P3, SPEED up and down, TIME buttons are now
inoperable.) To STOP the operation. Press the On/Off button and the machine will slowly stop.



When the time is up the machine will beep several times and slowly come to a stop.

Page 11

«
...
10
11
12
13
14
...
»

Содержание VT300
















Отзывы:

Нет отзывов