Vibratrim VT300 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 15

Vibratrim VT300 Скачать руководство пользователя страница 11

Creating a new you!

Basic Operations (Manual Mode)



Plug in the machine and flip the on button next to the power cord. Press the Power button on
either the control panel next to the vibrating plate.



Use the Time



UP to increase the



DOWN to decrease the amount of time the unit will

operate before it shuts off. This will be displayed in the screen on the monitor. The maximum
time is 20 minutes. The default is 10 minutes.



Press the start button and the vibrating pad will start operating at the first speed level. Use the
SPEED



UP to increase the



DOWN to decrease the speed. The general frequency on motion

is 10-20 cycles per second.



To STOP the operation. Press the On/Off button and the machine will slowly stop.



When the time is up the machine will beep several times and slowly come to a stop.

Over use

For your safety and health do not use the VibraTrim for longer than 20 minutes at any one time. You
can use it several times a day. The VibraTrim stimulates so much lymphatic drainage that you also
need to be drinking the recommended 8 glasses of water a day to aid in the removal of toxins.

Page 10

«
...
9
10
11
12
13
...
»

Содержание VT300
















Отзывы:

Нет отзывов