9
REMOTE CONTROL
Power button:
Press the red power
button to utilise stand-by mode option.
We recommend you turn the machine
off completely using the power switch
at the back if leaving it for more than 30
minutes.
Start/Stop:
This button will start and stop
the programme
Time :
The default time is set to 10
minutes. Press this button to increase the
time.
Time :
The default time is set to 10
minutes. Press this button to decrease
the time.
Speed :
In manual mode this will
increase the speed of the machine until
it reaches the maximum level 20.
Speed :
In manual mode this will
decrease the speed of the machine
until it reaches the minimum level 1.
M:
Use to move through the speeds
quickly press M, once for level 6, twice
for level 10, three times for level 16.
P:
Press to access the preset
programmes. Once for P1, twice for P2,
three times for P3 & four times for P4, etc.
Then press Start/Stop to begin.
The range of the remote controller is
approx. 2.5metres. Aim the remote
controller’s infrared light at the reception
window on the control panel to operate
the machine.
The remote control does not control
the Display.
Do not mix old and new batteries.
Ensure that correct battery polarisation
is adhered to, this is shown in the battery
well of the remote control.
Dispose of old batteries as per required
by your local authorities, do not throw in
household waste.
VIBRACOACH IM - 1117.indd 9
08/11/2017 18:23:50
