27
Maintainance
Centering the Walking Belt
Before the shipment, the walking belt on the walking
machine has been adjusted to be centered for you.
During the transportation process, the walking belt
may be off-center. Before you start using the walking
machine, you must ensure that the walking belt is
already centered to ensure smooth running of the
walking machine.
Safety Tips
It is forbidden to operate the walking machine
during adjustment.
Steps
1
.
If the walking belt is shifted to left side, use the
L-shaped hex wrench to turn the adjustment bolt on the
left side clockwise by 1/4 turn, and operate it to the
speed of about 3km/h. After running for 1 minute,
observe whether the walking belt is centered. If the
walking belt is moved to the right, turn the adjusting
bolt counterclockwise by 1/8 turn. Repeat the above
actions until the walking belt is centered.
2
.
If the walking belt is shifted to right side, use the L-
shaped hex wrench to turn the adjusting bolt on the
right side clockwise by 1/4 turn, and run to the speed
of about 3km/h. After running for 1 minute, observe
whether the walking belt is centered. If the step is
moved to the left, turn the adjusting bolt
counterclockwise by 1/8 turn. Repeat the above
actions until the walking belt is centered.
The walking belt is shifted to right side
The running belt is shifted to left side
Note: If there is still a problem during the
adjustment process, please contact after sales
service.
