When your body’s center of gravity is located in the
acceleration zone of the walking belt, keep moving
in this area to maintain automatic acceleration as
shown in the below figure:
The center of the body is in the acceleration zone:
Walking operation
Accelerating
Keep your center of gravity in the holding area.
Keep moving in this area and maintain a constant
speed as shown in the figure. The center of gravity is
in the retention zone.
Uniform speed
2
.
After completing the three steps, the
starts running in automatic mode and records the
movement data.
MINI WALK
3
Automatic Control Mode
1
.
from the back of the
walking belt at a normal walking pace. Maintain 5-
10cm space between each foot as shown in the figure.
Continuously walk 3 steps
Start
Step 1 Step 2 Step 3
Motor cover
Deceleration zone
Acceleration zone
Motor cover
step 2
:
step 1
:
step 3
:
Automatic control mode uses AUTO RUN2.0
intelligent speed control system that controls
’s running mode without buttons.
MINI
WALK 3
The display shows that the content is synchronized
with steps, as shown in the figure:
23
The center of gravity (blue line)is located in the
acceleration zone
The gravity center of the human body (blue line)
is located in the speed keeping area
Motor cover
Motor cover
Speed keeping zone
