9.4
Span Adjustment with External Weight
1 Set Function 1.
Set Function 1 with nothing put on the pan.
Select span adjustment with external weight in Function 1
[
].
2 Start span adjustment.
Press the Cal key.
The display first indicates [
], and then
[
], and the balance starts adjusting the zero point
(If the display indicates [
], press the Function key).
When the display indicates [
], put a weight on the
pan. (If the display indicates [
], press the Function
key).
The balance starts adjusting the weighing capacity.
The display indicates [
] and [
] in sequence.
When span adjustment is completed, the balance goes back to
the normal display.
CAL
9.5
Span Test with External Weight
1 Set Function 1.
Set Function 1 with nothing put on the pan.
Select span test with external weight in Function 1
[
].
2 Start a span test.
Press the Cal key.
The display first indicates [
], and then [
],
and the balance starts testing the zero point. (If the display
indicates [
], press the Function key).
When the display indicates [
], put a weight on the
pan. (If the display indicates [
], press the Function
key).
The balance starts a weighing capacity point test.
The display first indicates [
] and then an error.
When you press a key, the balance goes back into
measurement mode.
CAL
35
