6.4.2
Set a reference weight by entering a value
You can enter a reference weight in the balance, and then make the display indicate the weight
percentage (%) of a sample with respect to the reference.
1 Set a reference weight.
Press the Function key for a few seconds.
When the display indicates [
], release the
key.
The display blinks a weight. If you have set a
reference weight before, that value is displayed.
2 Enter a reference weight.
Press the Zero/Tare key.
A dot (
) blinks in the right end of the display.
3 Select a number.
Every time you press the Zero/Tare key, the number
changes.
4 Select digit places to specify a reference
weight.
Press the Function key, and the specified number
shifts to the left, and you can enter the next digit.
5 Save the reference weight.
Press the Set key.
The balance beeps to indicate that the reference
weight was saved, and then goes back into
measurement mode.
6 Put a sample to weigh on the balance.
Put a sample to weigh on the balance.
The display indicates the weight percentage (%) of the
sample with respect to the reference.
Continuous press
M
g
⇒
⇒
⇒
〜
⇒
⇒
⇒
小数点
マイナス
Minus
●
Decimal point
M
g
%
Use the arrow keys to enter values
You can use the arrow keys to enter values instead of the Zero/Tare key or the Function key.
The arrow keys can be used as shown in the following figure:
Increase number
Shift to the right
Shift to the left
Decrease number
24
