Vibra FZ15001E Series, Руководство по установке

Страница: 26 / 46

- 16 -
2
Install as a field wiring terminal box.
・
The power supply box also can be installed/accessed in following way only when it is
installed as a built-in unit on a distribution board or other enclosure of which access is
permitted to the trained and authorised persons only.
・
Before beginning this operation, make sure to unplug the AC plug or shutdown the AC
mains.
・
Do not ever install the power supply box by this procedure if it is not protected nor
accessibility is not limited.
・
Be sure not to mistake the connection of AC N, L and ground.
・
Secure insulation to the each line of the AC power cord to avoid short sircuit or electric
shock.
・
Use the AC power cord of proper ratings.
・
Install the unit in such a way that the AC plug of the AC power cord is not blocked so as to
be able to access to shut off the power.
Fix the power supply box on the board.
(1)
To fix the power supply box on the board,
replace 4 rubber feet of the mounting leg
with M4 screws or bolts.
(2)
You can also change the mounting
direction by shifting the mounting leg as
shown in left.