Vibra FZ15001E Series, Руководство по установке

Страница: 13 / 46

- 3 -
Do not use the product where wind from an HVAC equipment directly
applies.
Accurate weighing may be impeded due to the fluctuation of surrounding temperature.
Do not use the product where there is direct sun.
Accurate weighing may be impeded due to the rise of internal temperature.
Do not use the product where floor is soft.
Accurate weighing may be impeded due to the tilting of the weighing section when an object
is placed on it.
Do not use the product where there is violent fluctuation of surrounding
temperature or humidity.
Accurate weighing may possibly be impeded. Use within a temperature range of 5 to 40
°
C
and below a humidity of 85% RH.
■
Do not connect the DC power supply cable, scale cable, or communication
cable to the scale with its connector or jack being wet.
That may cause short-circuiting or failure.
Do not give a shock to the scale.
It may cause breakage or failure. Place an article to be weighed softly.
Do not let an overload situation (o-Err indication) continue.
It may cause breakage or failure. Remove the article to be weighed immediately.
Do not use volatile solvent.
Use of volatile solvent is likely to deform the product. Dirt on the product should be removed
with a piece of dry cloth or cloth wet with small amount of neutral detergent.
Be sure to make adjustment at the time of installation or changing a use
place.
There occurs an error in measurement value. For the sake of accurate measurement, be
sure to make adjustment.
Check for an error periodically.
Use environment and chronological change cause an error in measured value, leading to an
inaccurate measurement.
Align the level of the scale without fail before use.
Weighing with a slanted scale causes an error, leading to an inaccurate measurement. Put
the scale on a robust place.