background image

v

End of Life Directives--Recycling

Your new Public Information Display contains several materials that can be recycled for 

new users.
Please dispose of according to all Local, State, and Federal laws.

Disposal of Waste Equipment by Users in Private Househould in the European 

Union.
This symbol on the product or on its packaging indicates that this product 

must not be disposed of with your other household waste. Instead it is your 

responsibility to dispose of your waste equipment by handing it over to a 

designated collection point for the recycling of waste electrical and electronic 

equipment. The separate collection and recycling of your waste equipment at 

the time of disposal will help to conserve natural resources and ensure that it is 

recycled in a manner that protects human health and the environment. For more 

information about where you can drop off your waste equipment for recycling, 

please contact your local city office, your household waste disposal service or the 

shop where your purchased the product.

This radio transmitter has been approved by Industry Canada.
This Class B digital apparatus complies with Canadian standard CAN ICES-003(B)/NMB-003(B). This device 

complies with Industry Canada License exempt RSS standard(s). Operation is subject to the following 

two conditions. This device may not cause interference and (2) this device must accept any interference, 

including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an  uncontrolled environment. 

This equipment should be installed and operated with a minimum distance of 20cm between the radiator 

& your body.

Stability Hazard

The product may fall, causing serious personal injury or death. To prevent injury, this product must 

be securely attached to the floor/wall in accordance with the installation instructions. Many injuries, 

particularly to children, can be avoided by taking simple precautions such as:
ALWAYS use cabinets, stands, or installation methods recommended by the manufacturer of the product.
ALWAYS use furniture that can safely support the product.
ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or 

grabbed.
NEVER place a product in an unstable location.
NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both 

the furniture and the product to a suitable support.
NEVER place the product on cloth or other materials that may be located between the product and 

supporting furniture.
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of 

the product or furniture on which the product is placed.
If the existing product is going to be retained and relocated, the same considerations as above should be 

applied.

Содержание V55N203 Series























Отзывы: