Vibe V55N203 Series Скачать руководство пользователя страница 4

iv

ESD Warnings

When user close to the monitor, it may cause the equipment discharge and reboot to the display of main 

menu.

Warning:

This equipment is compliant with Class A of EN55032/CISPR 32. Operation of this equipment in a 

residential environment could cause radio interference.

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses and can radiate radio frequency energy and, 

if not installed and used in accordance with the instruction manual, may cause harmful 

interference to radio communications. Operation of this equipment in a residential area is 

likely to cause harmful interference in which case the user will be required to correct the 

interference at his own expense. 

Changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

Use only an RF shielded cable that was supplied with the display when connecting this display to a 

computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or 

excessive moisture.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) this device 

must accept any interference received, including interference that may cause undesired 

operation.

End-of-Life Disposal

Your new Public Information Display contains materials that can be recycled and reused. Specialized 

companies can recycle your product to increase the amount of reusable materials and to minimize the 

amount to be disposed of.
Please find out about the local regulations on how to dispose of your old display from your local dealer.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal 

regulations. For additional information on recycling, contact www.eia.org (Consumer Education Initiative)

Waste Electrical and Electronic Equipment--WEEE

Attention users in United States: 

Please dispose of the product according to all Local, State and Federal Laws. For disposal or recycling 

information, contact: www.mygreenelectronics.com or www.eiae.org.

iv

Содержание V55N203 Series























Отзывы: