Viavi MPOL*-85, Руководство пользователя

Страница: 55 / 74

MPOLx-85 / MPOLx-85P 55
8 M
EMORY
M
ANAGEMENT
G
ENERAL INFORMATION
8
M
EMORY
M
ANAGEMENT
General information
The MPOLx-85/MPOLx-85P allows you to save measured values
and inspection images in a structured data memory and recall
them as required.
Data can also be downloaded via the USB interface to a PC for
further evaluation.
Any result in the memory is identified by 4 values:
Note: The TimeStamp is added automatically during saving and
ensures unambiguousness, even when the Fiber ID has not been
incremented after each measurement.
Saving results
Before starting an measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project “default”, which is always present.
To learn more about managing Test-Tool- and Workflow-
Projects see chapter “Managing Projects” on page 31 .
Results are stored simply by pressing the [
G
] key. Each time the
key is pressed, the result just displayed will be saved.
Note: Instruments with an integrated patch cord microscope (“PCM”)
use a specific app, also called “PCM”, to operate that microscope.
Therefore, images taken by the PCM can easily be distinguished
from images taken by an external probe.
Type Example value
Project name default
Application name POWERMETER, PROBE, PCM
Fiber ID FiberID1, CablePair6
Format ???
TimeStamp 23:59:59 12/31/2017