Viavi MPOL*-85, Руководство пользователя

Страница: 48 / 74

48 MPOLx-85 / MPOLx-85P
7 PCM & PROBE O
PERATION
B
ASIC SETTINGS
P5000i connection
The Probe application requires a P5000i Digital Probe in order to
be fully functional (see the list of all accessories in “Accessories”
on page 71 ).
Note: The P5000 series probe (the predecessor of the P5000i) is not
supported.
To connect the probe:
1. Plug your P5000i into either USB port.
The initialization starts immediately.
2. Connect the P5000i to the fiber being inspected.
3. Press the [
C
] key, then tap the [ PROBE ] button or use the
arrows keys.
– or –
Press the [
H
] key to toggle between the measurement view
and the inspection view.
After initializing the P5000i will display the live view.
Note: In order to save battery power the cameras are switched off
5 minutes after leaving the respective application.
Basic settings
I
The digital probe is connected to the instrument (the PCM is
always connected).
I
The instrument is in PCM or PROBE mode.
Auto center
When auto center is switched on, the high magnification detail
view is automatically centered around the fiber endface center.
To switch on/off auto center:
1. Press the [
A
] key.
2. Tap the [ More ] button.
3. Tap [ PCM Settings ] or [ Probe Settings ] .
4. Tap [ Auto Center ] to toggle on/off.