Viavi mA-1302, Руководство по эксплуатации

Страница: 63 / 132

Chapter 4 Chassis Web User Interface (UI)
Web UI Pages
mA-1302/mA-1305 AXIe Chassis Operation Manual Rev. D0
Page 4-10 April 2020
Module Sensors
When a Module button is selected the Sensor section of the Module Data Table is
populated with a button for each sensor on the selected module: the Sensor Button
label identifies the type of sensor. If a Module does not contain sensors this section
of the Module Data Table remains empty. Selecting a sensor button populates the
Sensor Information section of the Module Data Table.
Module Sensor Information
The Module Sensor Information section of the Module Data Table is populated when
a Sensor Button is selected. The type of sensor information displayed in the Module
Data Table depends on the module.
Triggers and Timing Configuration Pages
The Chassis provides several trigger and timing signals which allow the Chassis to be
configured to support a variety of test and measurement configurations. The available
trigger and timing signals allow for synchronous or asynchronous timing of instrument
modules within a Chassis system.
Refer to the Appendix B “Timing and Trigger Sources Signal Definitions” for a description
of Chassis trigger and timing signals.
Refer to the following sections for detailed information and procedures for configuring
Chassis triggers and timing:
• Configure Chassis Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
• Configure Clock References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
• Chassis Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23