13
AGRI-ALERT WIRELESS MODULE
AGRI-ALERT WIRELESS MODULE rev.04
4 Run the RF cable through a 1/2” diameter rigid PVC pipe. This pipe will be used as
a support for the antenna. Make sure it is long enough (about 6 feet).
5 If required, connect the optional lightning arrestor to the antenna. This device
protects the system from damage by intercepting flashes of lightning and trans-
mitting their current to the ground. Refer to section 2.2 to ground the lightning
arrestor. If no lightning arrestor is used, connect the antenna directly to the RF
cable.
6 Connect the antenna to the RF cable connector.
DO NOT TWIST THE NON-ROTATABLE
SECTION OF THE RF CONNECTOR!
7 Connect the other end of the RF cable to the Wireless module.
DO NOT KINK OR OVERTIGHTEN
THE RF CABLE