20
helping to download the given R-curve into the
SpO
2
simulator.
High-pressure sterilization cannot be used on
the device.
Do not immerse the device in liquid.
It is recommended that the device should be
kept in a dry environment. Humidity may
reduce the life of the device, or even damage
it.
7.2 Cleaning and Disinfecting Instruction
Surface-clean sensor with a soft cloth damped
with a solution such as 75% isopropyl alcohol,
if low-level disinfection is required, use a mild
bleach solution.
Then surface-clean with a cloth damped ONLY
with clean water and dry with a clean, soft
cloth.
Caution:
Do not sterilize by irradiation steam, or ethylene oxide.
Do not use the Oximeter if it is damaged.
