Viatek LIFE JUICER, Руководство пользователя

Страница: 8 / 40

·8·
6. USING YOUR JUICER
1. Ensure the Hopper is properly threaded on top of the Juice Bowl.
2. Turn the control switch to the ON position to juice fruits.
3. Press the Food Pusher slowly down until all fruits or vegetables have gone through the juicer.
Do not press the Food Pusher rapidly, as the juicer will not be as effective. (CAUTION: Do not
put your hand or any other object in the Food Chute during operation.)
4. The juice from the fruit and/or vegetables will fl ow directly into the Juice Tank and the pulp will
be collected in the Pulp Tank.
5. When juicing is complete, ensure that the juicer’s control switch is set to the OFF position and
the juicer is unplugged (the unit can now be safely be disassembled). DO NOT run the Juicer
without any food inside the unit, as this could overheat the motor.
6. If the Juice Bowl is stuck and does not detach from the base, press reverse button “R” for 3 to 5
seconds. Repeat this process 2 or 3 times. Then, push the Juice Bowl upward while turning .
7. Disassemble your juicer in the following order:
1. Remove the Food Pusher
2. Remove the Hopper
3. Remove the Juice Auger
4. Remove the Strainer Holder and Strainer
5. Remove the Juice Bowl
8. The Juicer has a unique cleaning process when switching between different types of juices. To
clean, simply place one of the collectors under the juice spout and pour water though the Food
Chute while the unit is on. This will rinse out most of the residue remaining from your last juicing.
When the water from the slow juicer begins to run clear, it indicates that the unit is clean and ready
to make a new juice recipe.
NOTE: This process is not an alternative to a complete cleaning of each disassembled part.