VIASYS Bear Cub 750PSV Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 98

VIASYS Bear Cub 750PSV Скачать руководство пользователя страница 85

Service Manual

85

of SYN (16h) or DLE (10h) appears in the data packet (including the Check Sum,
see below) an escape sequence will be used. The illegal character will be preceded
by the DLE character and 10h will be subtracted from its original value.

The second character in each packet (both transmitted and received) is defined as
the ID character. Valid ID characters are defined in tables 9-3, 9-4 and 9-5.

All other ID's are undefined at this time or are for internal use only. Any request for
data using an undefined ID will be responded to by either the transmission of
undefined data or will be ignored by the ventilator.

The Check Sum [Check] is defined as the one’s complement of the sum of all data
contained in the data packet excluding the “SYN” and “CHECK” characters.

Table 9-3: Valid Requests Received by the Ventilator

Format:

[ SYN ]

[ID]

[Check]

[ SYN ]:

16h

[ ID ]:

20h

Send all Adult Control Settings

40h

Send all Adult Alarm Settings/Status

60h

Send all Adult Monitored Data

A0h

Send all Infant Control Settings

C0h

Send all Infant Alarm Settings/Status

E0h

Send all Infant Monitored Data

[ Check ]:

Check

Sum

Table 9-4: Valid Message Transmitted by the Ventilator

Format:

[ SYN ]

[ID]

[Data #1]

[Data #n]

[Check]

[ SYN ]:

16h

[ ID ]:

00h..0Fh

Real Time Data, No Alarms

10h 1Fh

Real Time Data, Alarm Condition

20h

Adult Control Settings

40h

Adult Alarm Settings

60h

Adult Monitor Settings

A0h

Infant Control Settings

C0h

Infant Alarm Settings

E0h

Infant Monitor Settings

[ Data #X ]:

Binary

Data

[Check[:

Check

Sum

L2346

Revision B

June 2004

«
...
83
84
85
86
87
...
»

Содержание Bear Cub 750PSV



































































































Отзывы:

Нет отзывов