Viadrus GARDE G 42 ECO, Руководство по эксплуатации и установке

Страница: 37 / 60

37
- Regulation A2: 1 pc regulator RVA 43.222, 1 pc regulator RVA 46.531, set of connectors SVA 43.222
and SVA 46.531, terminal board WAGO 46 with a conductor bundle 46, submersible
sensor B2 (type QAZ 21).
- Regulation A3: 1 pc regulator RVA 63.280, set of connectors SVA 63.280, terminal board WAGO 63
with a conductor bundle 63, submersible sensor B2 (type QAZ 21), outside sensor
B9 (type QAC 31).
- Regulation A4: 1 pc regulator RVA 33.121, set of connectors SVA 33.121, terminal board WAGO 33
with a conductor bundle 33, submersible sensor B2 (type QAZ 21)
It possible to order accessory for regulation:
- Types of sensors: - outside temperature sensor QAC 31
- submersible temperature sensor QAZ 21 (can also be used for
HWS heating)
- surface temperature sensor QAD 21
- Space instrument type: - indoor sensor QAA 70
- indoor sensor QAA 50
Regulation is delivered in a separate package. The regulators must be connected to the electric panel in
place of the boiler installation.
Optional boiler equipment isn’t included in boiler basic price.
Fig. no. 18 Pump thermostat connection- delivery on call
10.2 Assembly procedure
1. Put the boiler on the required standpoint (it is necessary to respect the demands on boiler positioning
stated in chap. 9) according to the project documentation. We recommend to transport the boiler to
the determined standpoint while on a pallet, possibly still wrapped in protective packing. If this isn’t
possible due to the space restrictions the boiler is transported without the packing by transferring it by
using the boiler base plate in which there are on the left and right hand side prepared two circular
openings determined for putting on the “ removal hooks”. By means of hooks the boiler can be lifted and
transported to the required standpoint. It is forbidden to use the gas and heating water pipes for
lifting the boiler. The boiler must stand fast on the incombustible pad in its vertical position and well–
balanced.
ídržný plech pro
tného toku spalin
ovací ventil
nástavec
horizontálního
p
ř
erušova
č
e tahu
(jen pro 7 č l.velikost
horizontální
p
ř erušova č tahu
odbo č ka TE
redukovaná 90
vypoušt ě cí ventil
Fig. no. 19 Connection to the heating system and the draught diverter assembly
2. Mount the TE-joint at the heating water outlet from boiler, the discharge valve at the heating water inlet
and automatic bleeder valve (Fig.no.19) at the heating water outlet. The parts are delivered together
T - kus
retaining plate for
combustion products
return flow fuse
automatic
bleeder valve
T-piece
horizontal draught diverter
extension
(only for 7 sectional size)
horizontal draught diverter
TE extension reduced 90
discharge valve
circuit diagram wiring diagram