manualshive.com logo in svg

VIA Technologies VT82C596B, Руководство пользователя

Поделиться
Скачать
VIA Technologies VT82C596B Скачать руководство пользователя страница 33

Chapter 3

Advanced Chipset Setup Page

This page lets you set some of the timing parameters for the 
system.

AMIBIOS SETUP – ADVANCED CHIPSET SETUP

©1998 American Megatrends, Inc. All Rights Reserved

Trend ChipAway Virus            Enabled
Bank 0/1 DRAM Timing          Normal
Bank 2/3 DRAM Timing          Normal
Bank 4/5 DRAM Timing          Normal
SDRAM CAS# Latency           3
DRAM Integrity Mode             Disabled
AGP Aperture Size                 64MB
I/O Recovery Time                  Disabled
PCI 2.1 Compliance                Enabled
VGA Frame Buffer USWC      Disabled
PCI Frame Buffer USWC        Disabled
USB Function                          Disabled
   USB Function for DOS         Disabled
Keyboard PowerOn Function  Disabled
Ultra DMA Support                  Disabled
                                                                                ESC  :  Quit             



  :  Select Item

                                                                                F1     :  Help             PU/PD/+/-  :  Modify
                                                                                F5     :  Old Values   (Shift)F2    :  Color
                                                                                F6     :  Load Optimal values
                                                                                F7     :  Load Best performance values

Trend ChipAway 
Virus

This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the 
built-in virus protection.

Bank 0/1 2/3 4/5 
DRAM Timing

These three items set the timing parameters for 
the memory that you have installed. Leave these 
items at the default values.

SDRAM CAS# 
Latency

This item determines the operation of the main 
memory CAS (column address strobe). We 
recommend that you leave this item at the default
value.

DRAM Integrity 
Mode

Use this item to define the kind of error correction
supported by the memory that you have installed.

AGP Aperture 
Size

This item defines an AGP for the graphics. Leave
this item at the default value 64MB.

I/O Recovery 
Time

Use this item to enable or disable the Recovery 
timing for legacy ISA expansion cards. Leave this
item at the default value.

PCI 2.1 
Compliance

Enable this item to support compliance with the 
PCI specification version 2.1

28

Содержание VT82C596B


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды