Chapter 2
1. On the mainboard, locate the SPDIF header for this bracket.
2. Plug the cable from the bracket into the SPDIF header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Internal Digital Audio
Perhaps you have an optional internal digital audio cable, you can
also use it to connect the digital audio output connector of a CD-
ROM or DVD drive to the pins 5-6 of SPDIF1.
Install Other Devices
Install and connect any other devices in the system following the
steps below.
Floppy Disk Drive
The mainboard ships with a floppy disk drive cable that can
support one or two drives. Drives can be 3.5” or 5.25” wide, with
capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
Install your drives and supply power from the system power unit.
Use the cable provided to connect the drives to the floppy disk
drive header FDD1.
18
IDE1
IDE2
1
1
FDD1
1
