VIA Technologies Viasis 3003, Руководство пользователя

Страница: 49 / 89

Page 45 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
Whether an E-Mail or SMS must be delivered is checked once per minute by the viasis. If a
delivery cannot be done due to an active Bluetooth, USB or GSM data connection, the transfer
its started within a minute after the closure of the connection. Is a viasis powered off during
the scheduled time of delivery, the E-mail will not be sent after the next power on anymore.
An E-mail delivery is valued valid as soon as the mail server (SMTP-server) acknowledges
the data reception and the server connection is closed regularly. In this case the stored and
transferred measurement data are erased in the flash memory automatically. Otherwise the E-
mail delivery is repeated within a minute after the failure and until the transfer is successful.
Be aware if you use the daily interval a lot of small data files is created, which must be
merged later on to be able to create e. g. a week long evaluation.
6.4.2.2 SIM card PIN code
The input of the PIN
1
code or the request of its set status can only be done by a serial RS232
cable connection. Access by the GSM, Bluetooth or USB data connections is refused with the
message “
No access possible ”.
Select the GSM/E-mail menu item “ 2. Pin number ” to enter the 4 digit PIN code delivered
from the service provider together with the SIM card, for example:
Pin number=1234 <Return>
In case the SIM
2
card is already inserted in the push/pull SIM card holder located at the con-
trol panel backside in the battery box you should receive following answer:
+CPIN: READY
OK
In case of an error or problem you get one of the messages listed in the table below:
+ CME ERROR: SIM not inserted SIM card not in the SIM card holder, not
readable or defective
+ CME ERROR: incorrect password Entered PIN code is wrong
ERROR / ERROR SIM PIN PIN code wrong or already inserted
+CPIN: SIM PIN PIN code required
+CPIN: SIM PUK
3
PIN code setting failed 3 times, SIM card is
locked. You can unlock the SIM card exter-
nally only, e. g. by inserting the SIM card in
a mobile phone and insertion of the 8 digit
long PUK code
4
.
If you enter < Return > only at the PIN code prompt the status of the PIN setting
is delivered without a setting and one of the status messages above are output.
Repeated insertion of the already set correct PIN code is illegal.
1
PIN – „Personal Identification Number“ - 4 digit long numeric pass code
2
SIM – “Subscriber Identity Module
” – Component for radio network user identification
3
PUK – „Personal Unlock Code” – 8 digit long unlock code to be found in SIM card accompanying information of your
GSM/GPRS service provider.
4
Guidance for the procedure is in common documented in the manual of your mobile phone