VIA Technologies VAB-1000, Руководство пользователя

Страница: 51 / 72

VAB VAB VAB VAB----1000 User Manual 1000 User Manual 1000 User Manual 1000 User Manual
40
4.4. Installing into a Chassis
The VAB-1000 can be fitted into any chassis that has the mounting holes for
compatible with the standard Pico-ITX mounting hole locations. Additionally,
the chassis must meet the minimum height requirements for specified areas of
the board. If the companion card VAB-1000-T is being used, the chassis will
need to accommodate the additional space requirements.
4.4.1. Suggested minimum chassis dimensions
The figure below shows the suggested minimum space requirements that a
chassis should have in order to work well with the VAB-1000.
Figure
Figure Figure
Figure 36
36 36
36:
: :
: Suggested minimum chassis dimensions
Suggested minimum chassis dimensions Suggested minimum chassis dimensions
Suggested minimum chassis dimensions
Each side of the board should have a buffer zone from the internal wall of the
chassis. The side of the board that accommodates the I/O coastline should
have a buffer of 1.5 mm. The side on the opposite end of the I/O coastline that
has SATA connector and board-to-board pin headers should have a buffer of
at least 12 mm, or 27 mm if the VAB-1000-T companion card will be used.
The two sides adjacent to the I/O coastline should have at least a 2 mm buffer.