VIA Technologies VAB-1000, Руководство пользователя

Страница: 39 / 72

VAB VAB VAB VAB----1000 User Manual 1000 User Manual 1000 User Manual 1000 User Manual
28
3. 3. 3. 3. Jumpers Jumpers Jumpers Jumpers
Jumper Description Jumper Description Jumper Description Jumper Description
A jumper consists of pair conductive pins used to close in or bypass an
electronic circuit to set up or configure particular feature using a jumper cap.
The jumper cap is a small metal clip covered by plastic. It performs like a
connecting bridge to short (connect) the pair of pins. The usual colors of the
jumper cap are black/red/blue/white/yellow.
Jumper Setting
Jumper Setting Jumper Setting
Jumper Setting
There are two settings of the jumper pin: “ Short Short Short Short and Open Open Open Open ”. The pins are
“ Short”
Short” Short”
Short” when a jumper cap is placed on the pair of pins. The pins are ”Open”
”Open” ”Open”
”Open” if
the jumper cap is removed.
In addition, there are jumpers that have three or more pins, and some pins are
arranged in series. In case of a jumper with three pins, place the jumper cap on
pin 1 and pin 2 or pin 2 and 3 to
Short
Short Short
Short
it.
Some jumper size is small or mounted on the crowded location of the board
that makes it difficult to access. Therefore, using a long-nose pliers in installing
and removing the jumper cap is very helpful.
Figure Figure Figure Figure 22 22 22 22: Jumper settings example : Jumper settings example : Jumper settings example : Jumper settings example
Caution:
Caution: Caution:
Caution:
Make sure to install the jumper cap on the correct pins. Installing it in the wrong pin might cause
damage and malfunction.