manualshive.com logo in svg

VIA Technologies KT400A, Руководство пользователя

Поделиться
Скачать
VIA Technologies KT400A Скачать руководство пользователя страница 69

S-ATA RAID Configuration

Page 5-7

5. Use the arrow key to highlight 

Start Create Process

 and press <Enter>.

A warning message will appear, Press 

Y

 to finish the creation, or press 

N

 to

cancel the creation.

6. Important note: All existing content in the hard drive will be destroyed after

array creation.

Delete Disk Array

A RAID can be deleted after it has been created.  To delete a RAID, use the
following steps:

1. Select 

Delete Array

 in the main menu and press <Enter>.  The channel column

will be activated.

2. Select the member of an array that is to be deleted and press <Enter>.

A warning message will show up, press Y to delete or press N to cancel.

Deleting a disk array will destroy all the data on the disk array except RAID 1
arrays.  When a RAID is deleted, the data on these two hard disk drives will be
reserved and become two normal disk drives.

Содержание KT400A

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды