manualshive.com logo in svg

VIA Technologies KT400A, Руководство пользователя

Поделиться
Скачать
VIA Technologies KT400A Скачать руководство пользователя страница 47

BIOS

Page 4-15

USB Keyboard Support

Enable/disable support for USB keyboard under DOS.
Options: Enabled, Disabled.

USB Mouse Support

Enable/disable support for USB mouse under DOS.
Options: Enabled, Disabled.

 

Super IO Chip Setup

Scroll to Super IO Chip Setup and press <Enter>. The following screen appears:

Onboard FDC Controller

Select “Enabled” if you wish to use onboard floppy disk controller (FDC).   If you
install an external FDC or the system has no floppy drive, select “Disabled “in this
field.
Options: Enabled, Disabled.

Onboard Serial Port 1/2

Select an address and corresponding interrupt for the first and second serial ports.
Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

UART Mode Select

This field configures the 2nd serial port for IR application. Select the required IR
protocol or select “Normal” to disable IR mode.
Options: Normal, IrDA and ASKIR.

Onboard Parallel Port

This field allows the user to configure the LPT port.
Options: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled.

Содержание KT400A

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды