VIA Technologies KT400A, Руководство пользователя

Страница: 58 / 88

BIOS
Page 4-26
Setup the timing at each cycle.
Options: 1T Command, 2T Command.
Current FSB Frequency
Display the current CPU front side bus frequency information.
Current DRAM Frequency
Display the current DRAM frequency information.
DRAM Clock
This item allows you to select DRAM clock.
Options: By SPD, 100MHz, 133MHz, 166MHz, 200MHz.
Auto Detect PCI Clk
When enabled the mainboard automatically disables the clock source for a PCI slot
which does not have a module in it, reducing EMI (ElectroMagnetic Interference).
Options: Enabled, Disabled.
Spread Spectrum
If you enable spread spectrum, it can significantly reduce the EMI (ElectroMagnetic
Interference) generated by the system.
Options: Disabled, Enabeld.
CPU Clock
Enables you to set the CPU front side bus speed at increments of 1MHz step. The
default is 100 MHz. Press <Enter> to display the following screen:
Key in the DEC (decimalism) number for the CPU clock.
Note: Overclocking failure will cause no display on monitor. At this instant,
press “
Insert
” key to revert back to the initial or default setting to boot
up your system.