VIA Technologies EPIA-N, Руководство пользователя

Страница: 57 / 72

BIOS Setup
49
PNP/PCI C
ONFIGURATIONS
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Select Yes if you are using a
Plug and Play capable
operating system. Select No if
you need the BIOS to
configure non-boot devices.
Item Help PNP OS Installed [No]
Reset Configuration Data [Disabled]
Resources Controlled by [Auto(ESCD)]
IRQ Resources Press Enter
Assign IRQ for VGA [Enabled]
Assign IRQ for USB [Enabled]
PnP / PCI Configurations
Phoenix - AwardBIOS CMOS Setup Utility
NOTE: This section covers some very technical items and it is strongly
recommended to leave the default settings as is unless you are an
experienced user.
PNP OS Installed
When set to “Yes”, the BIOS will only initialize the PnP cards used for booting
(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP
operating system. When set to “No”, the BIOS will initialize all the PnP cards.
Settings: [Yes, No]
Reset Configuration Data
This field should usually be left “Disabled”. When set to “Enabled”, the ESCD
(Extended System Configuration Data) is reset after exiting BIOS Setup only
when a newly installed PCI card or the system configuration prevents the
operating system from loading.
Settings: [Enabled, Disabled]