VIA Technologies EPIA-N, Руководство пользователя

Страница: 22 / 72

Chapter 2
14
C
ONNECTORS
Hard Disk Connectors: IDE1 & IDE2
The mainboard has a 32-bit Enhanced IDE and Ultra DMA 66/100/133
controller that provides PIO mode 0~4, Bus Master, and Ultra DMA
66/100/133 functions. Up to four IDE devices can be connected to the
system.
The primary hard drive should always be connected to IDE1 as the master
drive. Both IDE drives can connect to a master and a slave drive.
IDE1
1
If two drives are connected to a single cable, the jumper on the second drive
must be set to slave mode. Refer to the drive documentation supplied by the
vendor for the jumper settings.
The mainboard has include IDE2 as 44-pin IDE connector for installing a mini
2.5 inches 44-pin IDE hard drive.
IDE2
1