VIA Technologies EPIA-N, Руководство пользователя

Страница: 40 / 72

Chapter 3
32
First/Second/Third Boot Device
Set the boot device sequence as BIOS attempts to load the disk operating
system.
Setting Description
LS120 Boot from LS-120 drive
Hard Disk Boot from the HDD
CD-ROM Boot from CD-ROM
ZIP100 Boot from ATAPI ZIP drive
USB-FDD Boot from USB floppy drive
USB-ZIP Boot from USB ZIP drive
USB-CDROM Boot from USB CDROM
Legacy LAN Boot from network drive
Disabled Disable the boot device sequence
Boot Other Device
Enables the system to boot from alternate devices if the system fails to boot
from the “First/Second/Third Boot Device” list. When set to “Disabled”, no
alternate boot devices are allowed.
Settings: [Enabled, Disabled]
Boot Up NumLock Status
Set the NumLock status when the system is powered on. When set to “On”,
the keypad behaves as 10-key. When set to “Off”, the keypad behaves as
arrow keys.
Settings: [On, Off]
Typematic Rate Setting
Enables “Typematic Rate” and “Typematic Delay” functions.
Settings: [Enabled, Disabled]
Typematic Rate (Chars/Sec)
This item sets the rate (characters/second) at which the system retrieves a
signal from a depressed key.
Settings: [6, 8, 10, 12, 15, 20, 24, 30]