VIA Technologies EPIA-M920 Скачать руководство пользователя страница 76

Страница: 76 / 93

VIA EPIA-M920 User Manual

6.8.

Boot Settings

The Boot Settings screen has a single link that goes to the Boot Configuration, and Boot Option Priority
screens.

Figure 71: Illustration of Boot Settings screen

6.8.1.

Boot Configuration

The Boot Settings Configuration screen has several features that can be run during the system boot
sequence.

6.8.1.1.

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.

6.8.1.2.

BootupNumLock State

Select the keyboard NumLock state from On and Off.

6.8.1.3.

Display Logo

The Display Logo feature hides all of the Power-on Self Test (POST) messages during the boot sequence.
Instead of the POST messages, the user will see an OEM logo. This feature has two options: enabled and
disabled.

6.8.2.

Boot Option Priorities

The Boot Option Priorities screen lists all bootable devices.

6.8.2.1.

Boot Option #1

Sets the system boot order. This feature has two options: VIA Networking Bootagent/Disabled.

Содержание EPIA-M920






























































































Результаты поиска

Содержание EPIA-M920

Отзывы:

Бренды по названию

Популярные бренды

VIA Technologies EPIA-M920, Руководство пользователя

Результаты поиска

Содержание EPIA-M920

Отзывы:

Бренды по названию

Популярные бренды