VFTech GNOM Super PRO, Руководство оператора

Страница: 12 / 32

v03/2017
12
2.USER’S MANUAL FOR OPERATION
# To move vehicle Forward/Back and turn Right/Left use right joystick. You can adjust
speed gradually (128 grades) pressing the joystick. The direction and speed are indicated
on an overlay.
# To move vehicle Up/Down use left joystick. Also press left joystick to adjust the Jump
mode.
# Slow mode (SLOW). Press right joystick and adjust power gradually (50%, 75%, 100%).
# Simultaneously press X+ R1 to change the intensity of the front lights ( LOOP : 0% 
100%, 100%  . If press X+R1+ R2 simultaneously 100% brightness turns on.
( Simultaneously press X+ R2 adjust rear lighters – if it is mounted )
# Control
the GRABBER (if this is part of device) by keys R1/R2
# To tilt cam Up/Down press L1/L2 pads. If press L1+L2 simultaneously camera goes to
the median position.
# Jump mode allows to push vehicle slightly for a distance 30 – 50 cm them stop. To chose
the jump direction press arrows (Left/Right, Up/Down). To adjust the jump power use left
joystick.
# By keys X switch-on/switch off laser
# Autodepth mode. Press key ▲ to fix the vehicle at the depth you needTo change the
depth use left joystick. Autodepth mode and depth are indicated on an overlay.
# Autoheading controls ON/OFF from the «Start» key (version: left joystick to left – ON, to
right OFF ). You should select forward speed then switch ON autoheading. Autoheading
mode holds the speed and direction.
# You can choose the menu language (Russian/English)
5. Finishing the operation
To finish the operation switch power OFF then disconnect cables and pull into the reel.
Try to avoid nods and twisting of the cable.
After operation please clean propellers and shafts of motors and wash the vehicle in
fresh water.